A Study of Adsorption of Water Vapour on Wool under Static and Dynamic Conditions

Adsorption of water vapour on wool provides not only textile comfort, but also convenience in transportation due to increase in its bulk density. The adsorption and desorption isotherms of water vapour for wool were determined by both volumetric technique using a Coulter Omnisorp 100CX instrument and gravimetric method employing a Cahn 2000 electronic microbalance. Adsorption isotherm fitting to B.E.T. model and hysteresis on desorption was observed. The average effective diffusion coefficient of water in wool was found to be 8.4 × 10^-14 m²s^-1 at 25°C from gravimetric data. The effects of packing height and air velocity on the breakthrough curves were also investigated in the wool packed columns. For pseudo first order model, k values changing between 0.33 × 10^-6 – 69 × 10^-6 s^-1 was obtained for 2.2–6.4 cm s^-1 air velocity and 0.05–0.20 m packing height ranges.     

Multilayer adsorption of alcohols from benzene/n-heptane mixtures on silica gel

An equation for multilayer adsorption from multicomponent liquid mixtures on solid surfaces¹ has been examined. For this purpose experimental adsorption data for four alcohols from benzene/n-heptane mixture on silica gel have been measured. Average number of the adsorbed layers, heterogeneity parameter and capacity of the surface phase have been evaluated by using the equation mentioned above.

---

Mehrschichten-Adsorption von Alkoholen aus Benzol/n-Heptan-Mischung an Silica Gel

Zusammenfassung Eine Gleichung für Mehrschichten-Adsorption an festen Oberflächen¹ aus Mehrkomponentenlösungen wurde getestet. Zu diesem Zweck wurden experimentelle Daten für die Adsorption von vier Alkoholen aus Benzol/n-Heptan-Mischung an Silica Gel herangezogen. Der Mittelwert für die Anzahl der Adsorptionsschichten, der Heterogenitätsparameter und die Kapazität der Oberflächenphase wurde aus dieser Gleichung berechnet.

     

Protein adsorption characteristics of calcium hydroxyapatites modified with pyrophosphoric acids

Protein adsorption characteristics of calcium hydroxyapatite (Hap) modified with pyrophosphoric acids (PP(a)) were examined. The PP(a) modified Hap particles (abbreviated as PP-Hap) possessed anchored polyphosphate (PP: P-{O-PO(OH)}(n)-OH) branches on their surfaces. The proteins of bovine serum albumin (BSA: isoelectric point (iep)=4.7, molecular mass (M(s))=67,200 Da, acidic protein), myoglobin (MGB: iep=7.0, M(s)=17,800 Da, neutral protein), and lysozyme (LSZ: iep=11.1, M(s)=14,600 Da, basic protein) were examined. The zeta potential (zp) of PP-Hap particles as a function of pH overlapped; zp-pH curves were independent of the concentration of pyrophosphoric acids (abbreviated as [PP(a)]) used for modifying Hap surface. The saturated amounts of adsorbed BSA (Delta n(ads)(BSA)) were increased three-fold by the surface modification with PP(a) though they were independent of the [PP(a)]. Furthermore, the fraction of BSA desorption was independent of the [PP(a)]. This enhancement of BSA adsorption onto the PP-Hap is due to the hydrogen bonding between oxygen and OH groups of the PP-branches and functional groups of BSA molecules. In the case of LSZ, a more higher adsorption enhancement was observed; the saturated amount of adsorbed LSZ (Delta n(ads)(LSZ)) for Hap modified at [PP(a)]=6 mmol/dm(3) was nine-fold than that for Hap unmodified. This remarkable adsorption enhancement was explained by a three-dimensional binding mechanism; LSZ molecules were trapped inside of the PP-branches. Hence, a fraction of LSZ desorption was decreased with an increase in the [PP(a)]; as more PP-branches are presented on the surface the higher retardation of LSZ desorption was induced. It was expected from their small size that MGB adsorb between the PP-branches as well as LSZ. However, the amounts of adsorbed MGB (Delta n(ads)(MGB)) did not vary and were independent of the [PP(a)] due to the small numbers of functional groups of MGB. In addition, no dependence of the fraction of MGB desorption on the [PP(a)] was observed. The results of zp for all the protein systems supported the mode of protein adsorption discussed. The anchored structure of the PP-branches developed on the Hap surface to provide three-dimensional protein adsorption spaces was proved by a comparative experiment that was elucidating the effect of pyrophosphate ions for BSA adsorption onto Hap.     

An IR Study on Adsorption of CO and NO on Copper Ion-exchanged Zeolite Beta

Thee adsorption of CO and NO on copper ion-exchanged zeolite Beta was investigated using IR method.It was found that the thermalvacuum pretreatment procedure could result in the reduction of Cu2 ions in zeolite Beta.The adsorption of CO on Cu sites in zeolite Beta closely follows Langmuir isotherm.Another Cu species may form during the reaction between water and CO.The catalytic decomposition of NO on the zeolite was observed at room temperature,indicating that the decomposition reaction may occur between two coordinated NO ligands of the same dinitrosyhc complex.Furthermore,the appearance of two series of NO adsorption bands reveals that copper ions existing at different cation sites may have different effect on the adsorption and decomposition of NO molecules.     

Influence of the aggregation state in solution on the supramolecular organization of adsorbed type I collagen layers

In the last years, adsorbed collagen was shown to form layers with a supramolecular organization depending on the substrate surface properties and on the preparation procedure. If the concentration of collagen and the duration of adsorption are sufficient, fibrillar collagen structures are formed, corresponding to assemblies of a few molecules. This occurs more readily on hydrophobic compared to hydrophilic surfaces. This study aims at understanding the origin of such fibrillar structures and in particular at determining whether they result from the deposition of fibrils formed in solution or from the building of assemblies at the interface. Therefore, type I collagen solutions with an increasing degree of aggregation were prepared, using the “neutral-start” approach, by ageing pH 5.8 solutions at 37 °C for 15 min, 2 or 7 days. The obtained solutions were used to investigate the influence of collagen aggregation in solution on the supramolecular organization of adsorbed collagen layers, which was characterized by X-ray photoelectron spectroscopy and atomic force microscopy. Polystyrene and plasma-oxidized polystyrene were chosen as substrates for the adsorption. The size and the density of collagen fibrils at the interface decreased upon increasing the degree of aggregation of collagen in solution. This is explained by a competitive adsorption process between monomers and aggregates of the solution, turning at the advantage of the monomers. More aggregated solutions, which are thus depleted in free monomers, behave like less concentrated solutions, i.e. lead to a lower adsorbed amount and less fibril formation at the interface. This study shows that the supramolecular fibrils observed in adsorbed collagen layers, especially on hydrophobic substrates, are not formed in the solution, prior to adsorption, but are built at the interface, through the assembly of free segments of adsorbed molecules.     

Silylating Agents Grafted onto Silica Derived from Leached Chrysotile

Silica from leached chrysotile fibers (SILO) was silanized with trialkoxyaminosilanes to yield inorganic–organic hybrids designated SILx (x=1–3). The greatest amounts of the immobilized agents were quantified as 2.14, 1.90, and 2.18 mmol g⁻¹ on SIL1, SIL2, and SIL3 for –(CH₂)₃NH₂,–(CH₂)₃NH(CH₂)₂NH₂, and –(CH₂)₃NH(CH₂)₂NH(CH₂)₂NH₂ groups attached to the inorganic support. The infrared spectra for all modified silicas showed the absence of the Si–OH deformation mode, originally found at 950 cm⁻¹, and the appearance of asymmetric and symmetric C–H stretching bands at 2950 and 2840 cm⁻¹. Other important bands associated with the organic moieties were assigned to ν_as(NH) at 3478 and ν_sym(NH) at 3418 cm⁻¹. The NMR spectrum of the solid precursor material suggested two different kinds of silicon atoms: silanol and siloxane groups, between −90 and 110 ppm; however, additional species of silicon that contain the organic moieties bonded to silicon at −58 and −66 ppm appeared after chemical modification. These modified silicas showed a high adsorption capacity for cobalt and copper cations in aqueous solution, in contrast to the original SILO matrix, confirming the unequivocal anchoring of silylating agents on the silica surface.     

多壁碳纳米管-炭复合泡沫材料的制备和吸附性能

通过在聚氨酯泡沫模板中沉积多壁碳纳米管，用炭的预制体酚醛树酯将碳纳米管粘接固定在一起，经过高温碳化过程制备了碳纳米管-炭复合泡沫材料。红外光谱结果表明利用浓硫酸和浓硝酸的混合溶液处理可以使复合泡沫表面活化形成羧基和羟基，从而使复合泡沫具备较强的分子吸附能力。扫描电镜和氮吸附实验表明这种复合泡沫同时具备大孔和介孔，大孔能够满足流体自由流动的通畅性，介孔可以满足中分子的吸附需要。对标定物维生素B12的吸附实验证明这种复合泡沫对中分子量的生化分子具有有效的吸附能力。这种宏观尺寸的泡沫材料与传统的颗粒状活性炭相比具有简化工艺，提高吸附效率的应用潜力。     

Adsorption at liquid interfaces: The generalized Frumkin isotherm and interfacial structure

The thermodynamics of adsorption of amphiphilic surface-active compounds at the interface between two immiscible liquids is considered. At the interface, these molecules are supposed to replace a few of the adsorbed molecules of both solvents. Classical isotherms of adsorption (Frumkin, Frumkin-Damaskin, Langmuir, Henry) were based on the model of non-penetrable interface, where an adsorbate can substitute only molecules of one solvent. At the interface between two immiscible electrolytes, nonpolar oil/water interfaces, and liquid membranes amphiphilic molecules can substitute molecules of both solvent and classic isotherms cannot be used. The generalization of Frumkin isotherm for permeable and non-permeable interfaces, known as the Markin-Volkov isotherm, gives the possibility to analyze adsorption in a general case. The adsorption isotherms of pentafluorobenzoic acid at the octane/water interface at different pHs were measured by the drop-weight method. The thermodynamic parameters of pentafluorobenzoic acid (PFBA) adsorption at octane/water interface were determined. From the measurements of PFBA adsorption, the structure of the octane/water interface was determined. Substitution of one adsorbed octane molecule requires approximately three adsorbed PFBA molecules. This result shows that the orientation of solvent molecules at the interface is different from the bulk. Adsorbed octane molecules have a lateral orientation with respect to the interface. Gibbs free energy of adsorption equilibrium and thermodynamic parameters of PFBA adsorption show that the adsorption of PFBA at the octane/water interface is accompanied by a reduction in the attraction between adsorbed PFBA molecules as the pH decreases to the acidic region. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 10, pp. 1194–1200. The text was submitted by the authors in English.     

Studies of heterogeneity properties of selected high-temperature superconductor surfaces

Nitrogen adsorption measured at 77 K was used to characterize the surface heterogeneity of high-temperature superconductor surfaces. Properties relating to adsorption and porosity of the solids (adsorption capacity, specific surface area, radii and volume of the pores, pore-size distribution function) were determined from nitrogen adsorption–desorption isotherms and atomic force microscopy (AFM) for a series of oxide superconductors. It is shown that the adsorption isotherms of all samples are S-shaped and belong to type II according to the IUPAC classification. On the basis of the nitrogen adsorption isotherms and AFM data, fractal dimensions were determined and correlations found with adsorption and porosity parameters.     

Surface properties of silica gel samples modified by selected proteins

The adsorption of a polar (water) and a non-polar (n-octane) liquid on silica gels, modified by adsorption of proteins, has been studied by thermal analysis. Silica gels with physically adsorbed BSA and ovalbumin layers were used. Thermodesorption energies were determined from Q-TG and Q-DTG curves recorded under quasi-equilibrium conditions. Significant differences in liquid desorption were observed from the surfaces due to heterogeneous changes (energetic and geometrical) as a result of modification. These results are compared with those obtained for the samples heated at 160°C for 1 h.